Tuesday 9 December 2014

Playing with Hydrogel

Adding some water to Hydrogel.
We took about 7 cm3 of hydrogel . We extracted this from a clean dry Nappy.
You Need

Disposable nappies

A disposable nappy
Scissors
A large ice cream tub or similar container
Dessert spoon or similar measure
Stirring rod
Large beaker or plastic tub to hold at least 600 cm3
Plastic gloves for those with sensitive skin
a Cut the middle section out of the nappy – the thicker piece that is designed to absorb
the urine. Discard the other piece.
b Make sure the ice cream container is completely dry - wipe it with a paper towel if
necessary. Any moisture in the tub stops the experiment from working properly.
c Wear eye protection for the next step. Put the centre piece of the nappy into the ice
cream container and gently take it apart. Small white grains should start coming away
and this is what you are trying to collect. Keep gently pulling the nappy apart until you
have collected as many of the grains as you can. Do not do this roughly or you will lose
your product and put a lot of dust and fluff into the air. Avoid breathing in any of the
dust.
d Remove and dispose of all the fluff and other parts of the nappy, keeping the grains in
the bottom of the tub. They are heavier and fall to the bottom, which makes it easier to
separate them out.
e Estimate the volume of the grains.

Now the fun Bit

f Pour them into the large beaker and add about 100 cm3 of distilled water. Stir. Keep
adding  water until no more can be absorbed and stir between each addition.
Estimate the final volume of the hydrogel.

Now even more fun

g Add a dessert spoonful of salt and stir.

Monday 8 December 2014

Poinsettia pH paper

To make the Poinsettia pH paper:

  1. Cut the flower petals (actually specialized leaves called bracts) into strips
  2. Place the strips into a beaker.
  3. Add enough water to cover the plant material and simmer on a hot plate. 
  4. Filter the liquid into another container (such as a shallow petri dish) and discard the plant matter. 
  5. Saturate a piece of filter paper with the poinsettia extract. 
  6. Allow the filter paper to dry and cut the colored paper into test strips. 

Momentum

  Investigating Momentum using two @pascoscientific smart carts and a couple of other carts of the same mass. The figures in Capstone clearl...